Connect the four pin connector to the “C-Link” port on the RM Series’ modular interface. ... CORSAIR LINK. 2020 CORSAIR. "The RM650x is a high performance PSU featuring great build quality and a very silent operation." Using only the first half of the cable included with the RM power supply, plug the 2-pin and 3-pin connectors into the Cooling Node as you would a temperature probe and fan connector. iCUE-controlled PSUs Premium Efficiency PSUs. And of course, shipping costs in … It connects to the first cable with a 2-pin and 3-pin connector.After connecting the two parts of the C-Link cable, take the entire assembly and plug the other end into any available internal USB port.Within Link, you should see both “RM PSU 12V A Current”, which is the measurement of the +12V load on the power supply, and “RM PSU Fan”, which is the speed the fan within the power supply is spinning. Be the first to know Get special offers, exclusive product news, and event info straight to your inbox 2020 CORSAIR.
Copyright CORSAIR LINK Software. In order to initially position and name the RM’s fan in Link, you may want to run a benchmark or burn-in program like Furmark to get the fan moving. "-Tom's Hardware (Best Power Supplies 2020) LEARN MORE All rights reserved. Because the RM series uses an analog signal to send information about the fan speed and +12V rail’s load to the “C-Link” connector on the unit’s modular interface, an optional Corsair Digital Bridge or a Corsair Link Cooling Node is required in order to convert the analog signal to a digital signal.The Digital Bridge consists of two pieces. | Since the signals are still analog, Link will see the +12V current measurement as a temperature. To find pin 4 and pin 5, count from the left with the clip facing up and the pins facing toward you. 4.9.9.3 | 01/28/2019.
The Corsair AXi Series PSUs have a lot of premium features. It is suggested that you then rename the reading so it is easier to identify within Link.Since the fan does not send a signal until it is spinning, it will not show up in Link initially if connected to the Cooling Node. CORSAIR ONE (2017/2018) i7 … This is the cable that is included with the RM power supply.The other half of the cable comes with the option Corsair Digital Bridge. CPU Coolers. They use a digital signal processor for better performance, they're fully modular, and have a zero RPM fan mode at low loads. Unplug all cables from the PSU except for the main AC cable and the 24-pin cable.
| These can be logged under the “options” tab as well. The PSU fan speed can be graphed with the other fans in your system under the “graph” tab.If another Link compatible power supply was in used prior to the installation of the RM Series unit, an incorrect reading may show up. "The Corsair AX1600 i is the best PSU that money can buy today, period. If this happens, simply delete the current profile, set to default and create a new profile.If a USB port is unavailable, the RM power supply can plug into a Corsair Link Cooling Node. Meanwhile, it’s worth noting that as part of the recall program, Corsair is offering to ship out replacement PSUs in advance. i CUE-controlled PSU 90%, 92% and 94% Efficiency AXi Series - 860 to 1600 Watts HXi Series - 750 to 1200 Watts RMi Series - 650 to 1000 Watts Premium Efficiency & Electrical Performance PSU
Power Supply Units. All rights reserved. Using Corsair Link with AX Series Digital ATX PSUs - YouTube Custom Cooling. Copyright But one of the coolest things about the AXi power supplies, is their compatibility with the new Corsair Link software. Bend your paper clip so the ends can be inserted into pin 4 and pin 5. © Locate pin 4 and pin 5 on your 24-pin cable. Connecting an RM Series PSU to Corsair Link By Jonny Gerow, on September 23, 2013 Because the RM series uses an analog signal to send information about the fan speed and +12V rail’s load to the “C-Link” connector on the unit’s modular interface, an optional Corsair Digital Bridge or a Corsair Link Cooling Node is required in order to convert the analog signal to a digital signal. © Simply right click on the “temperature” being reported, select “open config panel” and change “temperature” to “12V Rail Current sense”. iCUE Smart Coolers 240mm AiO Coolers 280mm AiO Coolers CPU Air Coolers.